AIR SHOOTER is a do-it-yourself mechanical kits to make a wheel drive machine with three motors, are : forward, backward, right and left turn, made by it's controller. The third motor is used for fan to catch and shoot a ball. A creative performance fiel
Product Details...
The AVOIDER III is just like having your own robotic pet! This is an ideal way to learn the basics of electronics and mechanics. The mechanical and electronic parts are all user mounted.
The robot will move around on it's six legs automatically avoidin
Product Details...
Average customer rating: Total votes: 1
This printed circuit board is a collection of easyto- use BEAM circuits on a snap-apart printed circuit board (PCB). Modules include: Bicores (breadboard, single, dual, buffered), multiplexors, motor drivers, servo drivers, solarengines (2 types), chargin
Product Details...
The Brainboard Prototyping Board is designed to plug into the new "Version 2" Brainboard expansion ports. We designed it to offer you easy-to-use features tapped off the main brainboards, like:
• Three servo headers
• Raw 6V and regulated 5V power
•
Product Details...
Simple, quick and hungry for light, this zippy robot rockets around chasing a flashlight like Speedy Gonzales after cheese!
The Herbie circuit (invented by Randy Sargent) has been featured in the books "Junkbots, Bugbots, and Bots on Wheels", "Absolut
Product Details...
This little kit is a good introduction into soldering chips and components. When finished, you have a solar-powered, nightactivated dazzler. Comes with four highintensity LEDs that “PUMM” when the lights go out. That is, they turn on STRONG, t
Product Details...
Draw a black line on a white piece of paper and the Hyper Line Tracer robot will follow the path of the line!
A self assembly robot construction kit which is educational as well as fun to construct. This is an ideal way to learn the basics of electronic
Product Details...
HYPER PEPPY is a robot with a built-in sensor, which reacts to vibration from sound or physical contact. It moves forward but when it senses a high pitched noise (such as a hand clap) or vibration from physical contact with an obstacles, it retreats by re
Product Details...
The 224:1 GM2/3 gear motors are quite strong, rated ~45RPM with over 50in*oz at 6V, with a built-in (over-rideable) 40in*oz safety torque clutch. (Gm2 is easy to hack into a 14:1 motor
Product Details...
The GM4 uses the strong GWS05 servo mechanics without the servo electronics. Ideal for replacing standard servos when you have an appropriate motor driver circuit (see our ‘K SMD’, which fits right inside!). Complete with continuous-rotation output gear,
Product Details...
The GM10 is an 81:1 pagerpowered gearbox that in standard configuration is an auto-centering actuator. One snip, and you have a speedy 5gram gear motor. We even made the GM10W wheel to mate with it!
Product Details...
offers low voltage power efficiency, but it can generate some torque! At 3V, it turns 16RPM drawing only 20mA. Stall torque is 35in*oz at .23A! And it fits accessories designed for the GM2/3/8/9!
Product Details...
The series of gear motor are smaller 120:1 versions of the GM2/3. They’re speedier, and have proven themselves as effective mini sumo robot motors. Offering ~164RPM with over 20in*oz torque at 6V, whatever you put on the 2mm spined output shaft is going t
Product Details...
These 143:1 GM8/9 gear motors are shaped similar to their GM2/3 brethren, but are just a wee bit thicker. At ~79RPM with over 43 in*oz torque, they’re what we use in our award - winning Sumovore robot kits!
Product Details...
The Sanyo GM11 gear motors are very impressive with their full-metal gearbox. With the Gm11’s speedy 75.7:1 reduction ratio, we’ve got your application covered!
Product Details...
We have found this great series of metal gear motors with a wide variety of gear ratios. You are bound to find one that is perfect for your next project. These motors have a similar performance to the Sanyo Gear Motors for a better price.
Product Details...
The GM19 is a powerhouse bigbrother to the GM18. 35:1, larger “030” style motor, and funky rotated gearhead. 576rpm @ 6V, 7in*oz torque drawing 1.2A. Powerful!
Product Details...
Gm2 / GM3/ GM8/ GM9/GM17
Wheel Combo Deal Choose a red, black, blue or yellow wheel to complement your GM2, Gm3, GM8 OR GM9 gear motor, and save! Each set also comes with two traction bands. Let us know what colour you want, or you’ll get what we think
Product Details...
Gm10 Wheel Combo Deal
Get a wheel to mate with the GM10 and save! Choose from red, yellow, light grey, blue or black. Comes with two traction bands. Again, let us know what colour you want, or it’s luck-of-thedraw for you!
Product Details...
This general application BEAM motor is really quite good for solarengine designs needing torque, and small batterypowered robots. Output shaft fits RW or PRet-style accessories!
Product Details...
A high power motor that fits in the same form factor as used by the GM2/GM3 and GM8/GM9 style gear motors. When retrofitted (an easy process after removing the GM2/3/8/9 motor strap), it nearly triples the output speed and doubles the torque! Be forewarne
Product Details...
The VPM2 vibrating disk motor measures 12mm dia. x 3.4mm thick (½” x 0.13”). vibrates at 172Hz ~ 200Hz at 3 volts. No visible moving parts make this a very cool motion device!
Product Details...
This is the standard motor that is built in to the GM2/3/8/9. Nominally runs at 6VDC and consumes roughly 35mA.
If you’ve blown up your GMx motor, you’re in luck! We’ve got replacements! :)
Product Details...
Quality pager motors are getting harder to find now that cheap clones are everywhere. Be assured that our RPM2 pager motors are factory fresh, and very high quality. At 1.5V, it draws only 17.5mA @ 9700rpm, and 120mA stalled. At 3V, it draws 32.1mA @ 3190
Product Details...
Looking for _tiny_ motors? How about 4.1mm diameter by 19.7mm long (0.16”dia. x 0.78”)? At 3V, it spins 32,000rpm drawing only 27mA! Great for microbots!
Product Details...
Gear Motor Tread Links - Sometimes you just have to have treads, especially if you need a high-mobility solution for your robotics project. These 23mm (7/8”) wide x 12mm (1/2”) long tread links are very well designed, using 1/16” steel pins press-fit into
Product Details...
Wheel Watcher Spacer for GM2/3 - Due to the longer shaft lengths on the GM2 and GM3, the encoder wheel reflector is a bit too far away from the sensors on the Wheel Watcher. Use this spacer to bring the reflector back into range.
Product Details...